How to change manual transmission fluid jeep tj

On an AX, you will need 4 quarts of transmission fluid, a ratchet, 19mm socket, an oil catch pan and a bottle pump. 2. Park on level ground and place an oil catch pan underneath your transmission. Using a 24mm socket, remove the AX transmission fill bolt which is located on the driver side of your Jeep. 3.  · 5, Posts. #5 · . that skid plate is also the crossmember for your transmission. If you remove it you should throw a jackstand under the tranny to hold up some of the weight. My tranny on the also used quarts. Supposedly Redline MT90 or Redline Synchromesh, depending on your tranny is the best you can get.  · There are two ways of doing this: 1. Remove the shifter from the transmission and poor the oil in there until it comes out the fill hole. 2. Get a handheld pump and pump the oil into the transmission through the fill hole until it runs out. I personally like option 1. ^^^Yes, 10w motor oil is the "new" spec.

I'm looking for instructions to change the transmission fluid in my TJ with the 6 speed manual transmission. I see lots of comments about using Syncromesh instead of oil, but they all seem to be about pre with a different transmission. Jeep Wrangler manual transmissions are durable. However, checking the transmission fluid in your Jeep Wrangler is an essential part of proper maintenance. If you let the transmission fluid in your vehicle get too low, it can cause major damage and could potentially result in a ruined transmission. Check Out My Blog For Kayaking, Fishing, Travel, Jeeps and Everything Outdoors - www.doorway.ru GPT ADVENTURE CHANNELFilmed With A GoPro Hero4Please.

Jeep Wrangler automatic transmission fluid and filter change · 1. Remove the transmission skid plate. · 2. Remove all the bolts around the. A maintenance write-up on how to change the fluid in your Jeep TJ AX manual transmission. 2 Jul TMoney said: I would get a service manual and follow the procedure, I wouldn't want to run the transmission dry. TMoney, I have thought.